Main products: CNC lathe processing, automatic lathe processing and non-standard fastener customized, automatic edge milling machine and secondary processing
Main material: stainless steel: Sus303 suS304, suS316, SUS420, SuS410, etc. Carbon steel: 12L14,12L15,45 20 Q235, etc. Aluminum: AL6061 - T6, 6063 - T6, AL7075 etc. Brass: C3604(C38000),C3602(36000),/ HPB59-3 etc.; Plastics: OM(Delrin),Nylon(PA66),PVC, teflon, etc.; Others: Titanium alloy, Monel 400.
Main equipment: CNC lathe (10, oblique rail, center, compound turning center, etc.), 14 automatic lathes, 15 automatic slot machine (one word, cross, six, square) and secondary processing auxiliary equipment, 15 automatic slot machine (one word, cross, six, square) and secondary processing auxiliary equipment
Processing size range: automatic lathe: outer diameter from 1.0-20mm, CNC lathe: outer diameter from 1.0-100mm
Surface treatment: polishing, plating, passivation, electrogalvanizing, nickel, chromium, etc
Accuracy: + / - 0.01 ~ 0.05 mm
Processing technology: car processing, machining, secondary processing
Certificate: ISO9001:2008
Testing equipment: projector, caliper, micrometer, altimeter, etc
Automatic lathe parts are important parts of automatic lathe, automatic lathe operator maintenance personnel is to master the knowledge of the corresponding machine tool personnel or technical training personnel, and according to the correct operation rules and correct operation provisions of the operation of the machine tool.
Non-specialized staff shall not open the electric cabinet door, only specialized maintenance personnel are allowed to open the electric cabinet door for power maintenance; Make sure that the main power switch of the automatic lathe is turned off before opening the electric cabinet door.
In addition to some parameters for users to use and can be changed, other parameters can not be modified privately, otherwise accidents may occur; After modifying parameters, during processing, the machine tool should be tested and run first, and then use the machine tool after confirming that the machine tool is normal;
The PLC program of automatic lathe is designed by the machine tool manufacturer according to the needs of the machine tool and does not need to be modified. It is recommended that the machine be operated continuously for no more than 24 hours. If the continuous operation time is too long, the life of the electrical system and some mechanical components will be affected.
Jiangsu Dongfei Precision Manufacturing Co., Ltd. was established in 2019. The factory is located in Wulie Town, Dongtai City, Yancheng City, Jiangsu Province, which is close to Suzhou and Shanghai, with superior geographical location and convenient transportation.
Jiangsu Dongfei Precision is a professional precision turning processing manufacturers, the company's main products are non-standard fasteners, precision turning parts, turning and milling parts, non-standard screws, nuts, studs, hexagonal pillars, cylindrical pins, positioning pins, long axis and other precision parts. Can be customized according to customer requirements. The main equipment of the company are: CNC CNC turning and milling compound lathe, CNC CNC walking machine, automatic lathe, automatic milling machine, table lathe and other auxiliary processing equipment.
Since its establishment, the company has been constantly summing up experience, learning hard, focusing on research and development, and improving innovation ability. Adhere to strict standard quality management system to control the production process, adhering to the quality first, service first, focus on professional concept. We have won high praise from customers for our high quality products. Jiangsu Dongfei Precision hope to work with you hand in hand to create a "perfect, harmonious, win-win" cooperation system!
