How to correctly use spare parts in CNC lathe processing?

In order to better achieve the ideal application standard, in nc lathe processing should be applied refrigerant or select a good stiffness of the cutter head. How to choose the parts of the CNC lathe processing? Let's go to master it:

1, the tool:

Should choose high compressive strength, good wear resistance of the tool, in order to achieve the whole process of fine car back cutting amount, large amount of the provisions: professional CNC machine tool hole, should choose high precision, and good grinding performance of the tool, in order to ensure the processing accuracy of the provisions; The influence was better to reduce the performance of knife change zhi zhi and the grip knife should be selected as far as possible.

2. Fixture:

As far as possible the application of universal fixture clamping product workpiece, to prevent the application of special fixture; Parts accurate positioning standard overlap, reduce accurate positioning deviation.

3, CNC machine tool data clear processing line:

Should be able to ensure processing accuracy and surface roughness requirements; Machining circuit should be minimized to reduce the high speed of the tool between the fiesta.

4, processing line and processing capacity:

At the present stage, under the condition of number chamber lathe processing technology is not popularized, the unnecessary capacity on the wool ring, especially with the capacity of calcination and stock making dead skin, should be allocated to carry out processing on the CNC lathe, we must pay attention to the convenient distribution of nc machine specifications program flow.

5. Key points of fixture installation:

At present, three jaw chuck and roller mill hold the cylinder in the middle of the connection is done according to the support bar, three jaw chuck clamping point is: the first phase silk fixed bracket the screw on the hydraulic system refers to unload, but under traction belt, traction belt pipe from the back of the main shaft bearing out, then according to the fixed bracket will hydraulic chuck fixed screw off, hydraulic chuck can be unloaded.