CNC lathe processing in the daily operation of the need to pay attention to the place:

First, check whether the spindle is in good condition, check whether the tool fixing seat is firm, see whether the tool is damaged, this is responsible for the product;

Two, when the machine is running, remember not to open the protective plate, because, in the processing of products, in order to prevent sparks, will open the cutting fluid, once the protective plate is opened, it will splash himself, and there may be iron slag fly out;

Three, the placement of measuring tools, in the processing, to avoid the collision of measuring tools, because, because of the material, measuring tools are easy to damage, so, must be gently handled, can not be placed at will, according to the requirements of specific areas placed.

Much do not say, see these a few, whether you have prevented. These are the necessary common sense of CNC lathe processing, and are linked to their own safety, so, we must remember these precautions. Every processing of a product, we should clean up the iron slag in the lathe in time. Remember, we must wear good gloves when cleaning the iron slag, because the iron slag is very sharp, and a slight carelessness may give you a wound. These are some of the basic attention when processing, must remember, must not miss any details.